Last Updated Monday, October 20 2014
Print

Printing Inks - UV and EB Inks


Refine by Date:
From: To:
Emphasis on Environment Leads AMGRAPH, IdeOn to Develop EB Curable Gravure Inks
By David Savastano, Ink World Editor
Published January 20, 2010
EB curable inks are free of solvents and volatile organic compounds (VOCs) Read More »
UV Inks Continue to Make Gains In the European Marketplace
By Sean Milmo, Ink World European Editor
Published December 9, 2009
A major impetus behind the expansion of UV into new printing sectors is the growing acceptance of its safety and contribution to environmental compliance. Read More »
By Kerry Pianoforte, Ink World Associate Editor
Published December 3, 2009
Cabrun Ink Products Corp., a 52-year-old Philadelphia-based company, primarily manufactures a wide variety of lithographic inks as well as UV and rubber-based inks.The company has had much success with its Hexachrome inks, both in lithographic and UV… Read More »
By David Savastano, Ink World Editor
Published December 3, 2009
There is something special about the way a well-run employee-owned company operates. When employees have an ownership stake through an employee stock ownership plan (ESOP), they are more likely to remain with the company, and will have an extra incen… Read More »
By David Savastano, Ink World Editor
Published December 2, 2009
Perhaps the most challenging project for printers are scratch-off game tickets. In order to prevent fraud, intricate security measures are created on an ongoing basis, thus preventing people from being able to check the results ahead of time. Compan… Read More »
The UV/EB Report
By David Savastano, Ink World Editor
Published November 11, 2009
While the global recession took its toll on some markets for UV and EB, energy curable technologies made gains in other segments, and UV and EB ink companies should benefit from the increasing emphasis on the environment. Read More »
By Zubair Khan, Environmental Inks and Coatings
Published November 2, 2009
Ink manufacturers and their raw material suppliers have been evolving new technologies to meet these demands by providing new polymers, oligomers, monomers, photoinitiators, pigments and inks Read More »
By David Savastano, Ink World Editor
Published October 30, 2009
It is the dream of any entrepreneur to be able to start up a successful business. For Ken Smith and Chris Blackburn, the opportunity to begin a specialty coatings company that can compete with major suppliers has become a dream come true. While work… Read More »
By Dr. Alexander Grant, SunJet
Published October 29, 2009
UV jet inks are being developed that allow for appropriate jetting control, printhead compatibility, performance on a wide variety of media and can respond to real printing conditions such as varied print to cure time Read More »
By David Savastano, Ink World Editor
Published October 16, 2009
While electron beam (EB) curing has not received the same interest as UV, it too has also grown over the years Read More »
By Bonnie Bedolla, Flint Ink
Published October 15, 2009
Low odor and extractables levels can make UV flexo a more attractive option for a variety of markets Read More »
By David Savastano, Ink World Editor
Published October 9, 2009
When it comes to the world of business, one never knows how a new company will be started. A person may set out to start their own business, or a few people from the same company may begin their own venture. Sometimes, people from different companies… Read More »
By B. Magny, S. Pelletier and G. Albrighton; G. Eiselu00e9, Cray Valley and SICPA
Published October 9, 2009
Editor’s Note: “Importance of Monomer Interfacial Tension for UV Curable Litho Inks Performance” was presented during the 2002 RadTech Technical Conference in Indianapolis, IN. ©2002, RadTech International North America, Inc.… Read More »
By David Savastano, Ink World Editor
Published October 9, 2009
For some companies, a relatively minor acquisition can provide a major impetus for growth and success in other fields. Such is the case with Peacock Colors, the Addison, IL-based manufacturer of UV inks and colorants for plastics. In 1967, Frank Blo… Read More »
By David Savastano, Ink World Editor
Published October 9, 2009
Providing the best possible service to customers is an excellent recipe for success. For UVitec Printing Ink, Inc., a Lodi, NJ-based UV inks and coatings specialist, helping customers has been the key to the company’s success for more than two… Read More »