Milling

  • iFormulate Ltd. (UK)

    Jim Bullock, Director||07.15.16


  • 2015 Milling Report

    2015 Milling Report

    Catherine Diamond, Associate Editor||01.23.15
    Suppliers have reason to be hopeful in 2015.


  • The Milling Report

    The Milling Report

    David Savastano, Ink World Editor||01.18.13
    Milling and mixer manufacturers are working hard to develop new equipment that meets the needs of the ink industry


  • The Milling Report

    The Milling Report

    Kerry Pianoforte, Ink World Associate Editor||01.25.12
    Milling equipment manufacturers must innovate to stay ahead in these challenging economic times


  • Introducing High Viscosity Immersion Mills HCP S Series

    Introducing High Viscosity Immersion Mills HCP S Series

    Barry Cullens, Hockmeyer Equipment||01.20.11
    Editor’s Note: “Introducing High Viscosity Immersion Mills – HCP ‘S’ Series” was presented during the 2010 National Printing Ink Research Institute’s (NPIRI) Technical Conference. Hockmeyer has intr…


  • The Milling and Mixing Market

    The Milling and Mixing Market

    David Savastano, Ink World Editor||01.20.11
    With the worst of the recession apparently over, ink companies are starting to move forward on their equipment needs


  • The Milling and Mixing Market

    The Milling and Mixing Market

    David Savastano, Ink World Editor||01.12.10
    For manufacturers of milling and mixing equipment, 2009 was challenging, but there were some signs of improvement near the end of the year.


  • Fine Grinding of Carbon Black

    Harry Way, Netzsch Inc.||10.16.09
    Dispersion of carbon black pigment in water via bead milling is very difficult


  • The Milling Report

    The Milling Report

    Kerry Pianoforte, Ink World Associate Editor||02.02.09
    As a result of the economic downturn, milling and mixing manufacturers are further emphasizing the importance of service and new technologies.


  • The Milling Report

    The Milling Report

    Kerry Pianoforte, Ink World Associate Editor||02.01.08
    Milling equipment manufacturers are seeing particular interest in process improvements and new technologies, including nanotechnology.


  • The Milling Report

    The Milling Report

    Kerry Pianoforte, Ink World Associate Editor||01.26.07
    Milling and mixing equipment manufacturers have reported that increasing interest in UV, digital and nanotechnology is creating new opportunities.


  • The Milling Report

    The Milling Report

    David Savastano, Ink World Editor||02.06.06
    With the ink industry showing some growth in 2005, mill manufacturers have seen some improvement in terms of capital expenditures.


  • The Milling Report

    David Savastano, Ink World Editor||10.25.05
    Process improvement and greater efficiency, reliability and repeatability are among the qualities milling manufacturers are emphasizing.


  • The Milling Report

    David Savastano, Ink World Editor||09.12.05
    As 2004 opens, mill manufacturers are waiting to see if the economic recovery in the U.S. will lead to greater capital expenditures.


  • The Milling Report

    David Savastano, Ink World Editor||09.09.05
    Equipment manufacturers are hopeful that the gains they saw in capital expenditures at the end of 2002 will continue into 2003.