09.14.18
At the beginning of September, Koenig & Bauer placed large-format sheetfed offset in the spotlight in Radebeul.
The latest customer event shifted the focus to highly-efficient commercial production, web-to-print and online applications. The press shown was an eight-color Rapida 145 with perfecting unit for 4-over-4 production.
The highlights of this press included LED-UV dryers to enable immediate further processing, as a world premiere in large-format perfecting, a large-format reel sheeter of the latest Quantum generation, the high production speed of 15,000 sheets/hour in perfecting mode, and the autonomous printing of multiple jobs and job sections with ErgoTronic AutoRun.
Dirk Winkler, head of printing process technology at Koenig & Bauer in Radebeul, took general and current demands of the print market such as fast makeready, low waste, ultimate quality and high outputs as the starting point for his presentation of automation solutions and unique features of the Rapida sheetfed offset presses specifically for the commercial and online market.
These included the DriveTronic dedicated drive components which actually make simultaneous processes possible and thus contribute significantly to makeready reductions. The same can be said of the CleanTronic washing systems for optimized, parallel washing processes matched to each individual application. Fast, high-performance inline measuring and control systems (QualiTronic), a broad spectrum of VariDry dryers and end-to-end digital workflows are further key factors for extraordinarily cost-effective print processes.
Alongside general plus points such as fast further processing, improved print quality on uncoated papers, the elimination of odors and heat input into the substrate, waste and energy savings compared to other drying processes, reduced powder and coating consumption and less need for cleaning of the post-press machines, the LED-UV process offers further benefits particularly for perfector presses, for example:
The print demonstrations began with the production of content pages for a magazine on 80 g/m2 paper. This paper was supplied on a reel and cut into sheets at the full production speed of 15,000 sheets per hour on the reel sheeter. Subsequently, the audience was able to witness fast conversion of the feeder for production using sheets from a pile, in preparation for the printing of the magazine cover on 150 g/m2 glossy paper.
The next jobs were three sections of a cookbook, for which the substrate was changed yet again to a 115 g/m2 matt paper. The job changes between the individual sections were realized fully automatically in an AutoRun process. As a result, only 1.5 minutes passed between the last good sheet of the old job and the first good sheet of the new job. These jobs were followed by another cover on 200 g/m2 glossy paper and two sections of a travel guide on 135 g/m2 glossy paper.
The presentation was rounded off with a series of five jobs typically handled by an online printer. The first three were corridor-free gang formes with flyers requiring run lengths of just 300 copies each. Again making use of the AutoRun function, production was here so fast that the helper on the press had his work cut out to remove the old plates from the plate changers and to insert the new ones in time for the next change. The jobs also switched back and forth between formes with high and low ink coverages, illustrating one of the particular strengths of a LED-UV process when printing gang formes. To conclude, two further gang formes with business and greeting cards were printed on 350 g/m2 board. For these jobs, the printer disengaged three inking units at the press of a button, enabling 4/1 production to proceed with any delay for roller washing and without the need to apply roller oil in the unused units.
The latest customer event shifted the focus to highly-efficient commercial production, web-to-print and online applications. The press shown was an eight-color Rapida 145 with perfecting unit for 4-over-4 production.
The highlights of this press included LED-UV dryers to enable immediate further processing, as a world premiere in large-format perfecting, a large-format reel sheeter of the latest Quantum generation, the high production speed of 15,000 sheets/hour in perfecting mode, and the autonomous printing of multiple jobs and job sections with ErgoTronic AutoRun.
Dirk Winkler, head of printing process technology at Koenig & Bauer in Radebeul, took general and current demands of the print market such as fast makeready, low waste, ultimate quality and high outputs as the starting point for his presentation of automation solutions and unique features of the Rapida sheetfed offset presses specifically for the commercial and online market.
These included the DriveTronic dedicated drive components which actually make simultaneous processes possible and thus contribute significantly to makeready reductions. The same can be said of the CleanTronic washing systems for optimized, parallel washing processes matched to each individual application. Fast, high-performance inline measuring and control systems (QualiTronic), a broad spectrum of VariDry dryers and end-to-end digital workflows are further key factors for extraordinarily cost-effective print processes.
Alongside general plus points such as fast further processing, improved print quality on uncoated papers, the elimination of odors and heat input into the substrate, waste and energy savings compared to other drying processes, reduced powder and coating consumption and less need for cleaning of the post-press machines, the LED-UV process offers further benefits particularly for perfector presses, for example:
- Higher production speed;
- Elimination of the intermediate dryer tower which is otherwise necessary ahead of the perfecting unit;
- No danger of ink drying on the impression cylinders;
- No need for special ink-repellent jackets on the impression cylinders after perfecting;
- Minimized makeready times for frequent format changes;
- Optimum inline quality control as the QualiTronic ColorControl cameras can be placed in the ideal positions to scan both sides of the sheet
The print demonstrations began with the production of content pages for a magazine on 80 g/m2 paper. This paper was supplied on a reel and cut into sheets at the full production speed of 15,000 sheets per hour on the reel sheeter. Subsequently, the audience was able to witness fast conversion of the feeder for production using sheets from a pile, in preparation for the printing of the magazine cover on 150 g/m2 glossy paper.
The next jobs were three sections of a cookbook, for which the substrate was changed yet again to a 115 g/m2 matt paper. The job changes between the individual sections were realized fully automatically in an AutoRun process. As a result, only 1.5 minutes passed between the last good sheet of the old job and the first good sheet of the new job. These jobs were followed by another cover on 200 g/m2 glossy paper and two sections of a travel guide on 135 g/m2 glossy paper.
The presentation was rounded off with a series of five jobs typically handled by an online printer. The first three were corridor-free gang formes with flyers requiring run lengths of just 300 copies each. Again making use of the AutoRun function, production was here so fast that the helper on the press had his work cut out to remove the old plates from the plate changers and to insert the new ones in time for the next change. The jobs also switched back and forth between formes with high and low ink coverages, illustrating one of the particular strengths of a LED-UV process when printing gang formes. To conclude, two further gang formes with business and greeting cards were printed on 350 g/m2 board. For these jobs, the printer disengaged three inking units at the press of a button, enabling 4/1 production to proceed with any delay for roller washing and without the need to apply roller oil in the unused units.