09.24.14
DuPont Packaging Graphics recently installed a second DuPont Cyrel FAST 3000TD processor at Bemis Graphics, part of Bemis Company, Inc., the largest flexible packaging company in the Americas. The Cyrel 3000TD installations allowed Bemis Graphics to completely eliminate solvents and transition to a large-format, high-volume thermal Cyrel FAST workflow that provides high-quality flexographic plates to 17 Bemis printing locations.
After many years of fast growth and a solvent-based plate making system that was nearing end of life, Bemis Graphics found itself approaching the emission limits established by the state environmental regulatory agency. After a short initial trial with a competitive thermal system, they looked to DuPont for a Cyrel FAST solution.
After the successful installation of the first high-volume Cyrel 3000TD system, plate quality and productivity improved dramatically, so much so that they soon ordered and installed an additional Cyrel 3000TD unit. Both units were operational in a couple of days and are now running 24 hours a day, seven days a week, 360 days a year.
“The quality of the plates has been so good our plate re-work level has dropped a remarkable 60%, while the reliability and consistency of the Cyrel 50 X 80” FAST system has allowed us to optimize our plate room flow and increase our productivity 20%,” said Matt Elliott, general manager, Bemis Graphics. “The workplace is safer, for example, we don’t have 55 gallon drums everywhere and we now don’t need eyewash stations or spill kits.”
After many years of fast growth and a solvent-based plate making system that was nearing end of life, Bemis Graphics found itself approaching the emission limits established by the state environmental regulatory agency. After a short initial trial with a competitive thermal system, they looked to DuPont for a Cyrel FAST solution.
After the successful installation of the first high-volume Cyrel 3000TD system, plate quality and productivity improved dramatically, so much so that they soon ordered and installed an additional Cyrel 3000TD unit. Both units were operational in a couple of days and are now running 24 hours a day, seven days a week, 360 days a year.
“The quality of the plates has been so good our plate re-work level has dropped a remarkable 60%, while the reliability and consistency of the Cyrel 50 X 80” FAST system has allowed us to optimize our plate room flow and increase our productivity 20%,” said Matt Elliott, general manager, Bemis Graphics. “The workplace is safer, for example, we don’t have 55 gallon drums everywhere and we now don’t need eyewash stations or spill kits.”