Imec Makes Steady Progress on Perovskite PV Module

Imec announced it has reached a record 11.3% aperture and 11.9% active area efficiency for its thin-film perovskite photovoltaic (PV) module. The efficiency was measured over an aperture area of 16cm2. This achievement is the best conversion efficiency for perovskite modules in literature.
 
Organometal halide perovskites are considered an excellent material for thin-film solar cells as they have shown high conversion efficiencies at cell level. While the power conversion efficiency of this new class of thin film solar cells has increased rapidly in the last few years, further improvements are still needed to make thin-film photovoltaics an attractive technology for industrial production.
 
These record devices have been fabricated by the conventional lab scale spin coating process. Imec also used a linear coating technique (blade coating) for all the solution-based layers, to prove industrially viable fabrication methods. By using this method, the modules achieved a 9% aperture area efficiency. These achievements are important breakthroughs in bringing thin-film solar technology to industrial scalability for applications such as building integrated photovoltaics (BIPV).
 
“Imec is steadily improving the conversion efficiencies of its perovskite solar cells and at the same time adjusting the fabrication processes to enable industrial adoption of this promising technology,” said Tom Aernouts, R&D manager for thin-film photovoltaics at imec. “Leveraging our expertise in organic photovoltaics enables us to make rapid progress in enhancing the conversion efficiencies, ultimately aiming at conversion efficiencies of more than 20 percent for this type of thin-film solar cells.”
 
Imec develops a platform for glass-based perovskite modules and collaborates with Solliance, a cross-border Dutch-German-Flemish thin-film PV research initiative. Imec is also exploring stacking a perovskite cell on top of a silicon solar cell to increase the conversion efficiency of silicon solar cells. The perovskite cell will capture the light, which is not absorbed by silicon, as such enabling conversion efficiencies of more than 30%.