Synopsys, Applied Materials Collaborate on TCAD Models for Next-Generation Logic and Memory Technologies

Synopsys, Inc. and Applied Materials, Inc. announced a collaboration to develop technology computer-aided design (TCAD) models for next-generation semiconductor devices. The models derived from this TCAD collaboration will enable customers to speed up process development for 14-nanometer (nm) and 11-nm logic and new memory chip technologies, allowing them to lower cost and reduce time-to-market.

The continued scaling of logic transistors and memory cells to smaller and smaller dimensions requires new materials and architectures, which increase chip complexity and extend process development time for semiconductor manufacturers. The Synopsys TCAD tools have proven very effective in helping to reduce the number of engineering wafers needed to develop new technologies, acting both as a prototyping tool to explore new device architectures before a process is defined and as an engineering tool for process integration and optimization. In this collaboration,

Applied Materials will supply critical film properties and device characterization data from its advanced process systems to Synopsys, thereby enabling the development of models using Synopsys’ Sentaurus TCAD tool suite.

“We have a long and successful history of working with Synopsys on TCAD process modeling that has resulted in faster qualification of our manufacturing systems by customers for new applications,” said Dr. Klaus Schuegraf, vice president and CTO of the Silicon Systems Group at Applied Materials. “As new materials and designs make their way into leading-edge technology nodes, this new collaboration will enable our customers to take advantage of TCAD modeling to more rapidly develop and characterize new processes on our systems, saving them costly development time.”

“TCAD modeling has been essential for the development of 3D FinFET and memory technologies,” said Howard Ko, senior vice president and general manager of the Silicon Engineering Group at Synopsys. “The combination of Applied Materials’ equipment and Synopsys’ TCAD software will enable process engineers to continue scaling logic and memory devices. This collaboration combines the strengths of both companies and will provide leading-edge semiconductor companies tools to tackle the challenges and reduce the cost of technology development.”