12.17.18
Harper Corporation of America has added the QD Printer to its flatbed equipment offerings.
The QD Printer accommodates all QD proofer handles and print heads.
The QD Printer accommodates all QD proofer handles and print heads.
These components have been developed for most roll-to-roll printing processes including flexo, direct gravure, and offset gravure, as well as flexo using printing plates, ITR (in-the-round) flexo and gravure images, and all laser engraved images.
The QD Printer, like all Harper proofers, uses laser engraved ceramic anilox and imaged gravure rollers.
The travel speed units can be set in inches, feet, centimeters, or meters per minute. Travel speed can be set from 5 to 150 ft/min, or the equivalent speed in other units. The stroke can also be adjusted from 12 to 33 inches (30.5 to 84 cm).
The QD Printer, like all Harper proofers, uses laser engraved ceramic anilox and imaged gravure rollers.
The travel speed units can be set in inches, feet, centimeters, or meters per minute. Travel speed can be set from 5 to 150 ft/min, or the equivalent speed in other units. The stroke can also be adjusted from 12 to 33 inches (30.5 to 84 cm).
The controller has a cycle mode adjustable from 1 to 10 round trips. In addition, three drying options – hot air, Adphos NIR, or LED UV Phoseon (395nm) – can be activated simultaneously with printing or additional drying cycles.
In terms of size, the QD Printer has a table footprint of 42 in. (107 cm) by 14 in. (35.5 cm) and an overall length (including paper) of 48 in. (122 cm). In addition, it comes in two models to fit either Standard (2.75 in./70 mm) or Plus (5 in./127 mm) printer widths. It has a universal electrical power supply of 85-265 VAC, 65W, and 50/60 Hz.
In terms of size, the QD Printer has a table footprint of 42 in. (107 cm) by 14 in. (35.5 cm) and an overall length (including paper) of 48 in. (122 cm). In addition, it comes in two models to fit either Standard (2.75 in./70 mm) or Plus (5 in./127 mm) printer widths. It has a universal electrical power supply of 85-265 VAC, 65W, and 50/60 Hz.