09.15.16
Durst introduced at Labelexpo the increased capabilities of its label press product portfolio by integrating the Tau 330 with near-line pre- and post-press finishing solutions in cooperation with Omet, the Italian flexo label press manufacturer that recently celebrated its 1,500th press installation.
This announcement makes Durst the first digital press manufacturer to launch a hybrid press.
Also being shown for the first time in the US is the new, economical single-pass Tau 330 E UV Inkjet Label Press, featuring high-pigmented UV inks for reduced ink consumption. It is especially designed for small and medium-sized label converters. Durst also demonstrated its own production workflow software designed specifically for label print production providers.
Durst’s Tau 330 platform is a UV inkjet label press with more than 100 installations worldwide. It features a 330 mm (13 inches) print width, up to seven colors (CMYKOVW), and printing speeds of up to 48 linear meter per minute (169 fpm) with up to 1,260-dpi print resolutions. The press features leading-edge production capacity and print quality, and due to its seven color stations, it achieves close to 90% Pantone color gamut coverage.
The Tau 330 E is a UV inkjet label press featuring print widths of 200 mm or 330 mm, four or five colors, a printing speed of up to 48 linear meters/min. (157 fpm), and a printing resolution of up to 1,260 dpi. The system has been engineered with particular attention to equipment cost while maintaining the proven speed and printing quality of the flagship Tau 330 printing press. Its newly designed, high-pigment UV inkjet inks provide a noticeable cost reduction.
Together with the Tau 330 platforms, Durst is introducing its completely new Durst Workflow-Label – a modular, expandable prepress software for order entry, pre-press, RIP, color management, ink costing and production data management.
This announcement makes Durst the first digital press manufacturer to launch a hybrid press.
Also being shown for the first time in the US is the new, economical single-pass Tau 330 E UV Inkjet Label Press, featuring high-pigmented UV inks for reduced ink consumption. It is especially designed for small and medium-sized label converters. Durst also demonstrated its own production workflow software designed specifically for label print production providers.
Durst’s Tau 330 platform is a UV inkjet label press with more than 100 installations worldwide. It features a 330 mm (13 inches) print width, up to seven colors (CMYKOVW), and printing speeds of up to 48 linear meter per minute (169 fpm) with up to 1,260-dpi print resolutions. The press features leading-edge production capacity and print quality, and due to its seven color stations, it achieves close to 90% Pantone color gamut coverage.
The Tau 330 E is a UV inkjet label press featuring print widths of 200 mm or 330 mm, four or five colors, a printing speed of up to 48 linear meters/min. (157 fpm), and a printing resolution of up to 1,260 dpi. The system has been engineered with particular attention to equipment cost while maintaining the proven speed and printing quality of the flagship Tau 330 printing press. Its newly designed, high-pigment UV inkjet inks provide a noticeable cost reduction.
Together with the Tau 330 platforms, Durst is introducing its completely new Durst Workflow-Label – a modular, expandable prepress software for order entry, pre-press, RIP, color management, ink costing and production data management.